Price: $473.99 (as of Jun 20,2021 19:48:28 UTC – Details)
Curved projection screens offer several key advantages over flat projection screens. A curved screen helps offset pincushion distortion from a horizontal expansion lens and also wraps the image around your periphery more than a flat-screen for greater engagement with your projected image. In addition, the curved image is subject to less ambient reflected light from your room, while your projector’s light is more accurately reflected by the perfectly smooth viewing surface for an ideal picture.
HD picture: It has a very tight and smooth surface, unlike other impact screens that allow for a more crisp and clear HD image.
Durability: The top screen is backed by a high-performance sports net providing extra durability.
Finished Edges: The Net has grommets for easy connection with the frame.
Cost-effective replacement: Easily remove the top layer (as the screen is connected with a sports net by anchor clamps) when worn for, as a cost-effective replacement.
Noise cancellation: Less noisy, less bounce back.
A great choice for commercial or high-usage setups.
Material: We use weft yarn material specifically designed to take the full impact of a real golf ball.
12 x Frame Corners
1 x Pro Series Golf Simulator Projection Impact Screen
1 x Golf Archery Baffle Net
Note: If you need to return items to us, there is a 15% restocking fee incurred and will be deducted from your refund once the returned items have been received. The box frame is self-standing but can be fixed to the floor and/or rear wall using 1-inch diameter tube clamps. Please use a net or panel behind your golf impact screen before use. The combination of screen and net results in long golfing experience. For curved screen you can use the standard frame pipe fittings with bendable ABS rods. We don’t supply the EMT/ABS conduit tubing as freight shipping these inexpensive items is too costly. The 1″ diameter EMT/ABS conduit piping is available at all good hardware stores (Lowes or Home Depot etc).You’ll need 14 of the aluminium/ABS conduit tubing of 1″ diameter for the complete box frame. The frame should be around 2 inches per side greater than the screen size. i.e. if the screen size is 12 ft x 9 ft (144″ x 108″) then the frame should be 12ft 4″ x 9ft 4″ (148″ x 112″). If you find that the box frame is slightly too small then you can extend the tubes an inch or two out of the fittings to suit. If the box frame is too large then the pipes will have to be cut down in length to suit. If required use pipe clamps to secure the lower half of the frame or floors and /or the back pipes to the wall.